|
IMPORTANT:
The Multi Hole fittings will meet NEMA
4x = IP68 if the design parameters are complied with. To verify a
submersible NEMA 6 = IP68 application, the final assembly of cables
and fitting must be tested by the customer or submitted at the
customer's expense to an independent test lab or Sealcon for
certification. |
|
DESIGN PARAMETERS:
Cable diameter should not be less than 80% of
hole diameter and the difference between hole and cable diameter
should never exceed .04" (1 mm). |
|
SPECIAL INSERTS:
For a minimum of 1,000 pieces any special
insert hole or profile configurations available. For small
quantities we suggest drilling or machining the frozen solid plug
insert, using the fitting as a fixture. |
|
|
SPECIFICATIONS |
PRESSURE RATING:
IP 65 - NEMA 4x / IP 68 possible with
ideal fit |
MATERIALS:
Fittings: PA (Nylon) according to UL 94
Seal: Elastomer |
|
OPERATING TEMPERATURE |
-4°F - 203°F
(-20°C - 95°C)
|
|
|