O
O-Ring & Seal Rings - PG/NPT/Metric Threads RoHS Approval

X

 

 

PART NUMBERS

FIT THREAD

SIZES

DETAILED INFO

Seal Rings O-Rings
(Buna-N)

O-Rings
(Viton)

   
SM-12-NY OM-12-BN OM-12-VT M12 x 1,5 Click Here for more Information
SR-07-NY OR-07-BN OR-07-VT PG 7 / 1/4" NPT Click Here for more Information
SR-09-NY OR-09-BN OR-09-VT PG 9 Click Here for more Information
SR-11-NY OR-38-BN OR-38-VT 3/8" NPT Click Here for more Information
SM-16-NY OM-16-BN OM-16-VT M16 x 1,5 Click Here for more Information
SR-11-NY OR-11-BN OR-11-VT PG 11 Click Here for more Information
SM-20-NY OR-20-BN OR-20-VT M20 x 1,5 Click Here for more Information
SR-13-NY OR-13-BN / OR-18-BN OR-13-VT / OR-18-VT PG 13.5 / 1/2" NPT Click Here for more Information
SR-16-NY OR-16-BN OR-16-VT PG 16 Click Here for more Information
SM-25-NY OR-25-BN OR-25-VT M25 x 1,5 Click Here for more Information
SR-21-NY OR-21-BN OR-21-VT PG 21 Click Here for more Information
SR-34-NY OR-34-BN OR-34-VT 3/4" NPT Click Here for more Information
SM-32-NY OR-32-BN OR-32-VT M32 x 1,5 Click Here for more Information
SR-29-NY OR-29-BN OR-29-VT PG 29 Click Here for more Information
 - OR-10-BN OR-32-VT 1" NPT Click Here for more Information
- OR-54-BN OR-40-VT 1-1/4" NPT Click Here for more Information
SM-40-NY OM-40-BN OM-40-VT M40 x 1,5 Click Here for more Information
SR-36-NY OR-36-BN / OR-64-BN OR-36-VT / OR-64-VT PG 36 / 1-1/2" NPT Click Here for more Information
SM-50-NY OM-50-BN OM-50-VT M50 x 1,5 Click Here for more Information
SR-42-NY OR-42-BN OR-42-VT PG 42 Click Here for more Information
SR-48-NY OR-48-BN OR-48-VT PG 48 Click Here for more Information
SM-63-NY OM-63-BN OM-63-VT M63 x 1,5 Click Here for more Information


Assembly Instructions

If NEMA 4x or 6 (European IP 68 - submersible) is required, O-Rings or Seal Rings (ordered separately) should be used when mounting Strain Relief Fittings to a control panel, secured with a locking nut. The Straight Strain Relief fittings feature a molded O-Ring groove. For these fittings, the Buna-N O-Ring is the best solution. The Snap Elbows and some of the Conduit Fittings do not have a recess for an O-Ring. In that case, the Polyethylene Seal Ring would be the best choice, unless the hole can be beveled to accommodate an O-Ring.

 

TECHNICAL INFORMATION

SPECIFICATIONS

MATERIALS:
O-Ring: Buna-N or VitonŽ
Seal Ring: Polyethylene or VitonŽ

 

OPERATING TEMPERATURE

Buna-N: -40°F to 212°F (-40°C to 100°C)
VitonŽ: -40°F to 392°F (-40°C to 200°C)