 |
|
SHZ
Straight Hole Zert |
| “Straight Hole Zert” is designed to be
installed into a wide variety of thermoplastics. The insert can be
installed using Heat or Ultra-Sonics. The insert’s opposing helical
knurls provide excellent torque and pull-out resistance. Headed,
stud and headed stud variations are available. |
|
|
| |
 |
|
THZ
Tapered Hole Zert |
| “Tapered Hole Zert” is designed to be
used in a hole with an 8 degree inclusive taper at the top. This
feature makes it a favorite with molders. The combination of knurls
and vanes provide excellent pull-out and torque performance. |
|
|
| |
 |
|
TWZ
Twin Zert |
| “Twin Zert” is designed to be
installed into a wide variety of thermoplastics. The inserts double
ended design eliminates the need for orientation during
installation. Opposing helical knurls and knurled vanes give the
insert superior pull-out performance over most inserts. Heat is the
recommended method for installation. |
|
|
| |
 |
|
MNZ
Miniature Zert |
| “Miniature Zert” offers all the
characteristics of the Twin Zert with a miniature design. This
insert was designed for use in small moldings where space needs to
be optimized. Installs using heat or ultrasonics. |
|
|
| |
 |
|
LSZ
Low Stress Zert |
| “Low Stress Zert” offers a rounded
knurl pattern for use in notch sensitive amorphous plastics. Heat is
the recommended method for installation. |
|
|
| |
 |
|
TSZ
Thermo Set Zert |
| “Thermo Set Zert” offers a sharp
helical knurl pattern that broaches into Thermo Set materials.
Headed, Stud and Headed Stud variations are available. |
|
|
| |
 |
|
EFZ
Expansion Fin Zert |
| “Expansion Fin Zert” is designed to be
installed into a wide variety of thermoplastics. The insert is a
cold push-in insert that collapses during installation. As the screw
is installed into the insert it expands allowing the fins to
penetrate the plastic. This feature gives the insert a thread
locking effect. |
|
|
| |
 |
|
EDZ
Expansion Diamond Zert |
| “Expansion Diamond Zert” is a press-in
expansion insert designed for installation into hard thermo set
plastics. As the screw is installed into the insert it expands
allowing the diamond knurl to penetrate the plastic. This feature
gives the insert a thread locking effect. Headed and reverse headed
variations are available. |
|
|
| |
 |
|
PFZ
Press in Zert |
| “Press Fin Zert” is a cold press-in
insert designed to offer a free running thread in most thermoplastic
materials. The combination of fins and a straight knurl offer
excellent torque and pull out performance. Headed, Stud and Headed
stud variations are available. |
|
|
| |
 |
|
SSZ
Screw Zert |
| “Screw Zert” is a self tapping insert
that can be installed into thermoplastic, thermosetting plastics,
and composite materials. They work well into materials with low core
strengths. Headed and stud variations are available. |
|
|
| |
 |
|
PHZ
Press-in Hex Zert |
| “Press-in Hex Zert” is designed to be
installed into thermoplastics, by cold press-in. The hexagonal
barbed design gives exceptional pull-out and torque performance. For
additional performance, the insert can be installed by heat or
ultra-sonics. |
|
|
| |
 |
|
MBZ
Molded Blind Zert |
| “Molded Blind Zert” has a blind bottom
to prevent plastic material from contaminating the inner thread. MBZ
multiple lengths provide the design engineer with a large variety of
options to choose from. |
|
|
| |
 |
|
MTZ
Molded Thru-Hole Zert |
|
“Molded Thru-Hole Zert” is a molded–in type insert. Unlike the MBZ
it has a through hole to allow a screw to pass
through the insert. Multiple lengths are available to give a large
variety of options. |
|
|
