• Remove conductor insulation 4mm (.16") max
• Select appropriate Crimp tool setting (See contact accessories)
• Insert Crimp contact in to the positioner of the tool.
• Insert stripped end of conductor in to the crimp opening of the contact.
• Squeeze handles of crimp tool together

• Open crimping jaws and remove contact.
• Pry upper and lower insert approx. 3mm(1/8") apart as shown.
• Insert the contact and conductor assembly in to the desired location.
• Press upper and lower insert together.

Disassembly

No special tools are need to remove the crimp contacts from the Insert.

• Remove upper insert
• With a pair of needle nose pliers, wiggle the contact and push it through the lower insert.
• Insert contacts in to new location and push until it snaps in position.
• Align the nose and grove of the upper and lower insert and press together.