| |
|
IMPORTANT:
The Multi Hole fittings will meet NEMA
4x = IP68 if the design parameters are complied with. To verify a
submersible NEMA 6 = IP68 application, the final assembly of cables
and fitting must be tested by the customer or submitted at the
customer's expense to an independent test lab or RPP Distribution for
certification. |
|
|
DESIGN PARAMETERS:
Cable diameter should not be less than 80% of
hole diameter and the difference between hole and cable diameter
should never exceed .04" (1 mm). |
|
|
SPECIAL INSERTS:
For a minimum of 1,000 pieces any special
insert hole or profile configurations available. For small
quantities we suggest drilling or machining the frozen solid plug
insert, using the fitting as a fixture. |
 |
|
|
| SPECIFICATIONS |
PRESSURE RATING:
IP 65 - NEMA 4x / IP 68 possible with
ideal fit |
MATERIALS:
Fittings: PA (Nylon) according to UL 94
Seal: Elastomer |
|
|
OPERATING TEMPERATURE |
-4°F - 203°F
(-20°C - 95°C)
|
|
|
