| |
|
IMPORTANT:
The Multi Hole fittings will
meet NEMA 4x = IP68 if the design parameters are complied
with. To verify a submersible NEMA 6 = IP68 application, the
final assembly of cables and fitting must be tested by the
customer or submitted at the customer's expense to an
independent test lab or for certification. |
|
|
DESIGN PARAMETERS:
Cable diameter should not be less than
80% of hole diameter and the difference between hole and
cable diameter should never exceed .04" (1 mm). |
|
|
SPECIAL INSERTS:
For a minimum of 1,000 pieces any
special insert hole or profile configurations available. For
small quantities we suggest drilling or machining the frozen
solid plug insert, using the fitting as a fixture.
|
 |
|
|
| SPECIFICATIONS |
PRESSURE RATING:
IP 65 - NEMA 4x / IP 68 possible
with ideal fit |
MATERIALS:
Fittings: PA (Nylon) according to UL 94
Seal: Elastomer |
|
|
OPERATING TEMPERATURE |
-4°F - 203°F
(-20°C - 95°C)
|
|
|
