| |
|
IMPORTANT:
The Multi Hole fittings
will meet NEMA 4x = IP68 if the design parameters are
complied with. To verify a submersible NEMA 6 = IP68
application, the final assembly of cables and fitting
must be tested by the customer or submitted at the
customer's expense to an independent test lab or
for certification. |
|
|
DESIGN PARAMETERS:
Cable diameter should not be less
than 80% of hole diameter and the difference between
hole and cable diameter should never exceed .04" (1 mm). |
|
|
SPECIAL INSERTS:
For a minimum of 1,000 pieces any
special insert hole or profile configurations available.
For small quantities we suggest drilling or machining
the frozen solid plug insert, using the fitting as a
fixture. |
 |
|
|
|
SPECIFICATIONS |
PRESSURE
RATING:
IP 65 - NEMA 4x / IP 68
possible with ideal fit |
MATERIALS:
Fittings: PA (Nylon) according to UL 94
Seal: Elastomer |
|
|
OPERATING
TEMPERATURE |
-4°F - 203°F
(-20°C - 95°C)
|
|
|
