| |
|
IMPORTANT:
The Multi Hole fittings will meet
NEMA 4x = IP68 if the design parameters are complied with. To
verify a submersible NEMA 6 = IP68 application, the final
assembly of cables and fitting must be tested by the customer or
submitted at the customer's expense to an independent test lab
or for certification. |
|
|
DESIGN PARAMETERS:
Cable diameter should not be less than 80%
of hole diameter and the difference between hole and cable
diameter should never exceed .04" (1 mm). |
|
|
SPECIAL INSERTS:
For a minimum of 1,000 pieces any special
insert hole or profile configurations available. For small
quantities we suggest drilling or machining the frozen solid
plug insert, using the fitting as a fixture. |
 |
|
|
| SPECIFICATIONS |
PRESSURE RATING:
IP 65 - NEMA 4x / IP 68 possible with
ideal fit |
MATERIALS:
Fittings: PA (Nylon) according to UL 94
Seal: Elastomer |
|
|
OPERATING TEMPERATURE |
-4°F - 203°F
(-20°C - 95°C)
|
|
|
