Phillips Modified Truss Head - Zinc Plated | ![]() |
Part Number | Size | Quantity | Carton Weight |
Drive Size |
MPKZ-08012 | #8 x 1/2" | 10 M | 37.0 lbs. | #2 Phillips |
MPKZ-08034 | #8 x 3/4" | 10 M | 48.0 lbs. | #2 Phillips |
MPKZ-08100 | #8 x 1" | 8 M | 43.0 lbs. | #2 Phillips |
MPKZ-08114 | #8 x 1-1/4" | 6 M | 39.0 lbs. | #2 Phillips |
MPKZ-08158 | #8 x 1-5/8" | 3 M | 24.0 lbs. | #2 Phillips |
Application: For the application of metal lathe to heavy 12-20 gauge metal studs. Recommended drive speed is 2500 rpm. |
Wafer Head, High-Low Thread, Spade Point | ![]() |
Part Number | Size | Quantity | Carton Weight |
Drive Size |
EAGLE-SP10114 | #8 x 1-1/4" | 8 M | 40.0 lbs. | #2 Phillips |
EAGLE-SP10158 | #8 x 1-5/8" | 5 M | 40.0 lbs. | #2 Phillips |
Application: Recommended for the application of cement board to plywood. |
Wafer Head, High-Low Thread, Tek Point | ![]() |
Part Number | Size | Quantity | Carton Weight |
Drive Size |
EAGLE-TEK 10114 | #8 x 1-1/4" | 8 M | 50.0 lbs. | #2 Phillips |
EAGLE-TEK 10158 | #8 x 1-5/8" | 5 M | 50.0 lbs. | #2 Phillips |
Application: For attaching cement board to 14-20 gauge metal studs. Special extension coating provides over 500 salt spray hours. |
For prices and other information ask us at info@rppdist.com