Phillips Trim Head - Zinc Plated | ![]() |
Part Number | Size | Quantity | Carton Weight |
Drive Size |
TPKZ-06100 | #6 x 1" | 10 M | 32.0 lbs. | #1 Phillips |
TPKZ-06158 | #6 x 1-5/8" | 5 M | 25.0 lbs. | #1 Phillips |
TPKZ-06214 | #6 x 2-1/4" | 3 M | 20.0 lbs. | #1 Phillips |
TPKZ-08300 | #8 x 3" | 2 M | 24.0 lbs. | #2 Phillips |
Application: Finish screw for application of base board or trim through D/W to heavy 12-20 ga. metal stud. |
Phillips Modified Truss Head - Phos. Finish* | ![]() |
Part Number | Size | Quantity | Carton Weight |
Drive Size |
MPKP-08012 | #8 x 1/2" | 10 M | 37.0 lbs. | #2 Phillips |
MPKP-08034 | #8 x 3/4" | 10 M | 48.0 lbs. | #2 Phillips |
MPKP-08100 | #8 x 1" | 8 M | 43.0 lbs. | #2 Phillips |
MPKP-08114 | #8 x 1-1/4" | 6 M | 39.0 lbs. | #2 Phillips |
MPKP-08158 | #8 x 1-5/8" | 3 M | 24.0 lbs. | #2 Phillips |
*Also available in xylan coating on mill shipments.
Application: For the application of metal lathe to heavy 12-20 gauge metal studs. Recommended drive speed is 2500 rpm. |
For prices and other information ask us at info@rppdist.com