info

- Stainless Steel Enclosures -

These Enclosures are made of Stainless Steel per AISI 304. They are preferred for terminal block installations.
Standard equipment includes a perforated mounting angle to facilitate installation of the mounting plate or DIN rails. This makes it possible to drill access holes for cables anywhere along the sidewalls.

150 x 150 x 80 mm / 5.90 x 5.90 x 3.15"	150 x 150 x 120 mm / 5.90 x 5.90 x 4.72"	200 x 200 x 80 mm / 7.87 x 7.87 x 3.15"
200 x 200 x 120 mm / 7.87 x 7.87 x 4.72"	300 x 150 x 80 mm / 11.81 x 5.90 x 3.15"	300 x 150 x 120 mm / 11.81 x 5.90 x 4.72"
300 x 200 x 80 mm / 11.81 x 7.87 x 3.15"	300 x 200 x 120 mm / 11.81 x 7.87 x 4.72"	300 x 300 x 120 mm / 11.81 x 11.81 x 4.72"
400 x 200 x 80 mm / 15.74 x 7.87 x 3.15"	400 x 200 x 120 mm / 15.74 x 7.87 x 4.72"	400 x 300 x 120 mm / 15.74 x 11.81 x 4.72"
400 x 400 x 120 mm / 15.74 x 15.74 x 4.72"	500 x 200 x 120 mm / 19.68 x 7.87 x 4.72"	500 x 300 x 120 mm / 19.68 x 11.81 x 4.72"
600 x 200 x 80 mm / 23.62 x 7.87 x 3.15"	600 x 200 x 120 mm / 23.62 x 7.87 x 4.72"	600 x 300 x 120 mm / 23.62 x 11.82 x 4.72"
600 x 400 x 120 mm / 23.62 x 15.74 x 4.72"	800 x 200 x 120 mm / 31.49 x 7.87 x 4.72"	800 x 400 x 120 mm / 31.49 x 15.74 x 4.72"

ACCESSORIES

Fastening Lugs	Adjustable Corner Clips for Mounting Plate	Brass Inserts
Cover Screws	Mounting Screws	Key for DIN Head Screw
Spacers	Cover Plugs	Hinged Cover Screws
Extension Frame Screws	Hinges	Cover Flanges
Flanges with Knockouts	Cable Access Flange, Set	Strain Relief, Galvanized Steel
Flange Accessories	Flanges with Knockouts	Flanges with Membrane Knockouts